Demolition Work Code of Practice Audit Tool
An audit tool for the code of practice Demolition work: 35 referenced audit questions in 5 chapters, scored automatically in Excel, with a dashboard, corrective actions, a field checklist and a report template.
- AuditsDemolition work: Western Australia's edition of January 2023, second edition
- Questions35 in 5 chapters
- JurisdictionNational: the harmonised WHS jurisdictions
- Task or hazardCode of practice audits
- FormatsExcel and Word, editable, with PDF copies
- CodeDOC-AUD-DEM
- Version1.0 · 441 KB ZIP
About this audit tool
The Demolition Work Code of Practice Audit Tool is an editable audit tool for the code of practice Demolition work, for WHS advisers, managers, supervisors and health and safety representatives. It audits Western Australia's edition of January 2023, second edition in 35 questions. It includes an Excel workbook (Audit Workbook) with automatic scoring, a dashboard and a corrective action register; a field audit checklist and an audit report template in Word and PDF; and the guide How to Use This Audit Tool (PDF). Aligned to the code; not legal advice.
The demolition work code of practice explains how to manage the risks of demolishing or dismantling a structure: planning and notification, licensing, asbestos, adjacent buildings and services, controls during the work, demolition methods and special structures. This tool turns what the code expects into 35 plain-English audit questions in 5 chapters, in the code's own order, each with its chapter and section number and the evidence to look for.
Edition: This tool audits Western Australia's approved Code of practice: Demolition work (January 2023, second edition), the newest edition read for this tool whose licence allows commercial use. It follows the national model code; the questions keep to what all jurisdictions share, and the jurisdiction differences show what Western Australia added and the edition that applies elsewhere.
Rate each question Compliant, Partly, Not compliant or N/A. The download holds an Excel workbook (Audit Workbook) with automatic scoring, a dashboard and a corrective action register; a field audit checklist and an audit report template in Word and PDF; and the guide How to Use This Audit Tool (PDF).
Aligned to the code; not legal advice. A code is evidence of what is known (section 275); in New South Wales (from 1 July 2026) and Queensland (section 26A) you must follow the code or achieve an equivalent or higher standard. It is a tool for checking your own workplace, not a compliance audit or certification.
What it helps you do
- Check, chapter by chapter, how well the workplace does what the code of practice Demolition work expects
- Score each chapter and the whole audit automatically, leaving out what does not apply
- Turn every gap into a corrective action with an owner and a due date
- Report the results to the people who must act, with sign-off
Chapters audited
- 1 Duties and what is required
- 2 The risk management process
- 3 Planning the demolition work
- 4 Controlling risks in demolition work
- 5 Special structures
What is included
Delivered as one ZIP download. The files below are editable, and the Word documents also come as PDFs. Each download also includes Read Me First, a Product Overview, the Permitted Use Terms and Version Information (PDF).
| File | Format | What it is for |
|---|---|---|
| Audit Workbook | Excel (.xlsx) | The main tool: audit details, the checklist with a rating, finding, action, owner and due date for each question, automatic scores for each chapter and overall, a dashboard with a chart, and the corrective action register. |
| Field Audit Checklist | Word (.docx) | The same questions on paper, with the evidence to look for, to print and carry on the walk-through. |
| Audit Report Template | Word (.docx) | The report to the people who must act: executive summary, scope and method, overall and chapter scores, key findings, actions and sign-off. |
| How to Use This Audit Tool | The guide: when to audit, who should audit, how to rate and evidence, how the score works and how to follow up, with the jurisdiction table and the law. |
Which edition applies where
The tool is written once for the harmonised WHS jurisdictions. Each approves its own edition of the code: this is the table in the tool's guide. Check any question that may differ before you audit.
| Jurisdiction | The code there |
|---|---|
| NSW | Check SafeWork NSW's list of codes for the NSW edition. Section 26A applies from 1 July 2026. |
| Queensland | An approved code on this subject is in the Codes of Practice Notice 2022; check its edition. Section 26A applies (since 1 July 2018). |
| Western Australia | Approved code Demolition work (January 2023, second edition): the edition this tool audits. It adds WA's Class 1 and Class 2 demolition work, with its own notification and licensing. Codes are evidence (section 275); no duty to follow a code. |
| South Australia | On SafeWork SA's list of approved codes; check its edition. Codes are evidence (section 275); no duty to follow a code. |
| Tasmania | Check WorkSafe Tasmania for the approved edition. Codes are evidence (section 275); no duty to follow a code. |
| ACT | Approved by notifiable instrument NI2020-541, in force from 8 September 2020. Codes are evidence (section 275); no duty to follow a code. |
| Northern Territory | Check NT WorkSafe for the approved edition. Codes are evidence (section 275); no duty to follow a code. |
| Comcare (Commonwealth) | Work Health and Safety (Demolition Work) Code of Practice 2015 (F2016L00409), in force from 31 March 2016. It is older than the edition this tool audits; check any question against it. Codes are evidence (section 275); no duty to follow a code. |
| Victoria | Victoria has its own Occupational Health and Safety Act 2004, regulations and WorkSafe Victoria compliance codes. This tool is written for the harmonised WHS laws, not for Victoria. |
This tool is aligned to the code. It is not legal advice, and using it does not by itself mean your business has met its duties. Check the law and the code that apply where you operate.
An approved code of practice is a practical guide to achieving the standards the WHS laws require. In every harmonised jurisdiction the Minister approves codes (section 274 of the WHS Act), and under section 275 an approved code is admissible in proceedings as evidence of whether a duty was met: a court may have regard to it as evidence of what is known about a hazard or risk and how to control it, and may rely on it in deciding what is reasonably practicable. A business may show it met the duty in a different way that gives a standard of health and safety equivalent to or higher than the code's.
In New South Wales (from 1 July 2026) and Queensland (since 1 July 2018), section 26A of the WHS Act requires a business to comply with an approved code of practice that applies to it, or to manage the hazards and risks in a different way that gives a standard of health and safety equivalent to or higher than the code's. Where you do something other than the code says, record what you do and why it is at least as safe.
Source and licence
The audit questions paraphrase, and cite by chapter and section number, Western Australia's Code of practice: Demolition work (January 2023, second edition). Source: WorkSafe WA (worksafe.wa.gov.au). © State of Western Australia (Department of Mines, Industry Regulation and Safety) 2023, licensed under the Creative Commons Attribution 4.0 International licence (CC BY 4.0). No text, table or figure of the code is reproduced. This tool is not made or endorsed by Safe Work Australia or any regulator.
Questions about this audit tool
Which edition does it audit against?
This tool audits Western Australia's approved Code of practice: Demolition work (January 2023, second edition), the newest edition read for this tool whose licence allows commercial use. It follows the national model code; the questions keep to what all jurisdictions share, and the jurisdiction differences show what Western Australia added and the edition that applies elsewhere. The audit questions paraphrase, and cite by chapter and section number, Western Australia's Code of practice: Demolition work (January 2023, second edition). Source: WorkSafe WA (worksafe.wa.gov.au). © State of Western Australia (Department of Mines, Industry Regulation and Safety) 2023, licensed under the Creative Commons Attribution 4.0 International licence (CC BY 4.0). No text, table or figure of the code is reproduced. This tool is not made or endorsed by Safe Work Australia or any regulator.
Does it work in my state?
It is national: written once for the harmonised WHS jurisdictions (NSW, Queensland, Western Australia, South Australia, Tasmania, the ACT, the Northern Territory and Comcare). Each jurisdiction approves its own edition of the code, so the guide has a table of the edition that applies in each, shown on this page; check any question that may differ. Victoria has its own Occupational Health and Safety Act 2004, regulations and WorkSafe Victoria compliance codes. This tool is written for the harmonised WHS laws, not for Victoria. In New South Wales (from 1 July 2026) and Queensland (since 1 July 2018), section 26A of the WHS Act requires a business to comply with an approved code of practice that applies to it, or to manage the hazards and risks in a different way that gives a standard of health and safety equivalent to or higher than the code's. Where you do something other than the code says, record what you do and why it is at least as safe.
Is it the same as a compliance audit or certification?
No. It is a tool for the business to check, on its own evidence, how well it does what the code expects. It is not a regulator's inspection, a legal opinion or a certification. This audit tool helps your business check how well it does what the code of practice expects. It does not do that on its own, and a good score does not by itself mean the business has met its duties. Adapt the scope to your workplace, look for real evidence, and act on what you find. The tool is general information, not legal advice. The law and the codes differ between jurisdictions and change over time. Check the law and the edition of the code that apply where you operate before you rely on the tool.
Does the workbook need macros?
No. The scores, the dashboard and the corrective action register use ordinary formulas, so the workbook works in Excel and in other spreadsheet programs that read Excel files.
Does it copy the code?
No. Each requirement is paraphrased as an audit question and cited by its chapter and section number, so you can go to the code itself to read it. No text, table or figure of the code is reproduced.
Can we edit it?
Yes. The workbook is Excel and the checklist and report are Word, so you can add your logo and business name, adapt the scope to your workplace and add your own questions. The copyright notice must stay.
Is GST included in the price?
Yes. Every price in the store includes GST, so $59.00 is the total, including $5.36 GST. Your receipt is a tax invoice showing the GST.
How are the files delivered?
As a ZIP download. Card purchases can be downloaded straight away from the confirmation page and by a link we email you. Download links expire after 14 days for security; you can request a new one at any time.
Can we use it at more than one site?
Yes, across your own organisation. The tool is licensed for internal use by the purchasing organisation. A consultant or auditor using it with clients needs separate written permission.
What is your refund policy?
Your rights under the Australian Consumer Law are not affected. See the Refund Policy for how we handle a product that is faulty, not as described, or not what you ordered.
Legal information here is general. It may not be correct in your jurisdiction: please check with your local WHS or OHS regulator.
Ordering for a business or several sites? Request an invoice. Other questions: contact us.
