The safe work instruction from the Ride-on Mower Safety & Competency Pack, on its own: what the operator does, step by step, the hazards and controls, and when to stop.
A safe work instruction tells the operator how to do the work safely at your site: the purpose and scope, who may do the work, the equipment, the hazards and their controls (most effective first), PPE, the steps with clear stop points, emergencies, consultation and approval, and a signed acknowledgement. A short setup note lists what to adapt and every placeholder.
It is the same document as in the Ride-on Mower Safety & Competency Pack, word for word. The Ride-on Mower VOC Assessment Template checks a operator can do the work in it, and the Ride-on Mower Field Verification Checklist checks on site that the controls it relies on are working. Both are sold on their own too. The Ride-on Mower Safety & Competency Pack contains all of them, with the pre-start checklist and a setup guide.
A VOC supports workplace competency verification. It does not replace a high risk work licence where one is required. Operators must hold any licence, training or site authorisation required for the plant and the site.
Delivered as one ZIP download. The files below are editable, and every Word document also comes as a PDF. Each download also includes Read Me First, a Setup Note, a Product Overview, the Permitted Use Terms and Version Information (PDF).
| File | Format | What it is for |
|---|---|---|
| Ride-on Mower Safe Work Instruction | Word (.docx) | Step-by-step instruction for the operator: pre-start, checking the area, slopes and edges, thrown objects, people nearby, clearing blockages with the engine off, refuelling and parking. |
The safe work instruction is where the documents start: the VOC checks a operator can do the work in it, the pre-start checklist covers each job, and the field verification checks the controls it relies on. The Ride-on Mower Safety & Competency Pack contains all four.
Tells the operator what to do
The steps, hazards and controls for the task, written for the person doing it.
Included
Checks they can do it
Verifies each operator against that same instruction, on your equipment, with evidence and a clear outcome.
In the pack
Checks the equipment is fit to use
Every shift, before use, with clear do-not-operate criteria.
In the pack
Checks the controls are working on site
A supervisor checks on the floor that the controls the instruction relies on are in place and effective.
In the pack
What supervisors find in the field feeds back into the instruction and the VOC.
Before first use, adapt the documents to:
Before you use them
Yes, word for word. It is the safe work instruction from the Ride-on Mower Safety & Competency Pack, sold on its own with a short setup note.
If you need more than this one document, yes. The Ride-on Mower Safety & Competency Pack contains this document, the VOC assessment, the pre-start checklist and the field verification checklist, written to work together, with a setup guide. The pre-start checklist and the setup guide are only in the pack.
No. A VOC supports workplace competency verification. It does not replace a high risk work licence where one is required. Operators must hold any licence, training or site authorisation required for the plant and the site.
No. Where the manufacturer's instructions differ, follow the manufacturer and change the document to match.
No high risk work licence is needed for a ride-on mower. The operator must be trained and competent for the mower and the ground it works on, including slopes, and must hold the driver licence the road rules require before driving it on a public road. A VOC records that the operator can use your mower safely.
There is no single safe slope for every mower: use the maximum slope in the manufacturer's manual for your model, and less where the ground is wet, uneven or near an edge or water. Rollover protection only protects the operator with the seatbelt on. The safe work instruction covers checking slopes and edges before mowing.
Yes. Every document is supplied in Word (.docx) or Excel (.xlsx), so you can add your logo, change the wording and adapt it to your workplace. The copyright notice must stay.
Yes. The documents must be adapted to your equipment, the manufacturer's instructions, your site and your local controls before they are used. The setup note in the download lists what to change.
No document can. Your duties are met by managing the risks in your actual workplace. Using them does not by itself make a workplace compliant with WHS or OHS laws. They support the work of managing the risk; they are not legal advice.
Yes. Every price in the store includes GST, so $49.00 is the total, including $4.45 GST. Your receipt is a tax invoice showing the GST.
As a ZIP download. Card purchases can be downloaded straight away from the confirmation page and by a link we email you. Download links expire after 14 days for security; you can request a new one at any time.
Yes. Use Request an Invoice to order through your normal procurement process, with a purchase order number and quantities if you need them. The files are released once payment is confirmed.
Yes, across your own organisation. The documents are licensed for internal use by the purchasing organisation. A consultant, labour hire business or training provider supplying them to clients needs separate written permission.
They are written for Australian workplaces and refer to Australian WHS and OHS laws and licences. A business elsewhere should replace those references with its own country's requirements. Everything is editable for that.
Your rights under the Australian Consumer Law are not affected. See the Refund Policy for how we handle a document that is faulty, not as described, or not what you ordered.
Licence and legal information here is general. It may not be correct in your jurisdiction: please check with your local WHS or OHS regulator.
Ordering for a business or several sites? Request an invoice. Other questions: contact us.
Start with a toolbox talk to brief the crew on the hazard, then use the safe work instruction, the VOC and the field verification checklist to set and check the controls.
For anyone who works around forklifts, trucks, loaders or utes: how people are hit by mobile equipment, and the habits that keep pedestrians and machines apart.
For workers around noisy plant, tools or processes: how noise damages hearing for good, how to tell when it is too loud, and the controls that protect it.
For workers outdoors or in hot indoor environments: how heat illness develops, the controls that prevent it, and how to recognise heat stroke.
Rollover protection and keeping people clear of plant is a common critical control. To manage it as one, with performance standards and field verification across the business, see the Critical Control Management series.
Safe work instruction, VOC assessment, pre-start checklist and a supervisor field verification checklist, written to work together.
Verify ride-on mower operators: knowledge questions with a marking guide, a practical observation checklist, fail criteria and sign-off.
The supervisor's field verification checklist from the pack, on its own: checks on site that the controls for the work are in place and working.