Workplace health, safety, risk and emergency training · In person and online1800 231 173
Orana Skills Centre
Home / Documents & Templates / Critical Risk Management Plan
Documents & Templates

Critical Risk Management Plan

A complete, editable critical risk management plan for Australian businesses: find the risks that could kill or seriously injure, map them with bowties, choose and define the few critical controls, verify them in the field, and act every time one fails.

  • JurisdictionAustralia-wide
  • RegulatorThe WHS or OHS regulator where you operate
  • Task or hazardManaging critical risks
  • DocumentsManagement plan
  • FormatsWord (.docx), Excel (.xlsx), editable
  • CodeDOC-CRM-PLAN
  • Version1.0 · 2.2 MB ZIP

About the Critical Risk Management Plan

The Critical Risk Management Plan is a complete, editable critical risk management plan for Australian businesses, for australian businesses with work that could kill or seriously injure someone, and the officers, managers, supervisors and WHS advisers who manage those risks. It is aligned to the model WHS laws, with notes on how Victoria, Western Australia and the Commonwealth (Comcare) differ, and to ISO 31000 and AS/NZS ISO 45001, and follows the broad approach of ICMM's critical control management guidance, with a cross-reference to each. It includes the critical risk management plan, a policy, and a roles and accountabilities guide with officers' due diligence; a broad-brush workshop guide, an Excel critical risk register that tiers and ranks each risk on the same risk matrix as the WHS plans, and a drawn bowtie template; a critical control selection checklist, performance standard template, control owner accountability statement and Excel critical controls register; and an Excel verification program and schedule, a generic verification form scored Pass, Fail or Non-conformance, an officers' report, a failure response procedure and a dashboard. Everything is editable Word or Excel, delivered as an instant download.

Most fatal incidents happen when one of a small number of controls was missing, or did not work, on the day. Critical risk management puts the effort where the consequences are worst: it finds the risks whose worst credible outcome is a fatality, serious injury or catastrophic event, chooses the few controls that prevent them or limit the harm, writes down what working means for each, names who keeps each one working, and proves in the field that they are working. Under the WHS laws, a business must eliminate risks so far as is reasonably practicable, or minimise them, keep its controls effective, and review them when they do not control the risk; officers must take reasonable steps to verify that the resources and processes to do so are provided and used.

This plan sets up that system across the whole business, in eleven elements: identifying the credible catastrophic events with a broad-brush workshop, incident history, industry information and the people who do the work; a critical risk register that rates each one on the same risk matrix as the WHS risk register, gives it a tier (Tier 1 Extreme or Tier 2 High, crediting only verified controls) and ranks it; a bowtie for each; selecting critical controls against clear criteria; performance standards and failure modes; control owners; a critical control verification program scored Pass, Fail or Non-conformance, where a Fail stops the work and is escalated as a high potential incident; reporting to leaders and officers; responding to failures and learning from them; change and contractors; and review.

It is aligned to the model WHS laws, with notes on how Victoria, Western Australia and the Commonwealth (Comcare) differ, and to ISO 31000 and AS/NZS ISO 45001, and follows the broad approach of ICMM's critical control management guidance, with a cross-reference to each. It is not ISO certification, and it is not endorsed by ICMM. It uses the same words and method as our Critical Control Management training. Everything is editable Word or Excel, with a setup guide and a 90-day implementation plan. It is a framework to adapt and put into practice with your workers, not a substitute for doing so.

Who it is for

  • Australian businesses with work that could kill or seriously injure someone, in any state or territory
  • Owners, officers and senior managers who want to know, not hope, that the controls they depend on are working
  • Operations managers, supervisors and verifiers who own and check critical controls in the field
  • WHS and risk advisers who run bowtie workshops and critical control verification programs

What it helps you do

  • Find the risks that could kill or seriously injure, consequence first, and rank them
  • Map each critical risk with a bowtie built with the people who do the work
  • Choose the few critical controls, write down what working means, and give each an owner
  • Verify the critical controls in the field on a schedule, and stop the work when one fails
  • Report the truth about critical controls to officers, learn from every failure, and review

What is included in the Critical Risk Management Plan

Delivered as one ZIP download. The files below are editable, and every Word document also comes as a PDF. Each download also includes Read Me First, a Product Overview, the Permitted Use Terms and Version Information (PDF).

FileFormatWhat it is for
90-Day Implementation PlanWord (.docx)A week-by-week plan for the first 90 days: find and rank the critical risks, take the first one from bowtie to verified critical controls, then report to officers.
Setup GuideWord (.docx)What to adapt before use, in order: the critical risk coordinator and executive sponsor, scope, the risk matrix, the tier table, the escalation contact, links to your other systems, and every placeholder.
Australian Law Cross-ReferenceWord (.docx)Maps the model WHS Act and Regulations provisions on managing risks, maintaining and reviewing controls, officers, consultation and notifiable incidents to the pack, with how Victoria, Western Australia and Comcare differ.
Critical Risk Management PlanWord (.docx)The plan itself: eleven elements, from identifying credible catastrophic events to verification, response to failures, change and contractors, and review, each with its steps, roles, records, checks and review triggers, and what Tier 1 and Tier 2 require.
Critical Risk PolicyWord (.docx)A short critical risk policy for the chief executive or owner to sign: the commitment, what is expected of everyone, and the right to stop work when a critical control is missing.
Roles and Accountabilities GuideWord (.docx)Who has duties, the roles from officers and the executive sponsor to critical risk owners, control owners, verifiers, supervisors and workers, who does what in each element, and officers' due diligence.
Standards Cross-ReferenceWord (.docx)Maps ISO 31000, AS/NZS ISO 45001 and the broad approach of ICMM's critical control management guidance to where the pack covers each. Aligned to, not certification or endorsement.
Bowtie Analysis TemplateWord (.docx)A drawn bowtie for one critical risk: threats, preventing controls, the unwanted event, mitigating controls and consequences, with a worked example and a list of every control and gap.
Bowtie Workshop GuideWord (.docx)How to plan and run a bowtie workshop with the people who do the work: who to invite, the running order, the questions, the traps, and when the bowtie is finished.
Broad-brush Risk Assessment Workshop Guide and RecordWord (.docx)A guide and record for the broad-brush workshop that finds the credible catastrophic events, consequence first, using incident history, industry information and the people who do the work.
Critical Risk RegisterExcel (.xlsx)An Excel register of every critical risk as a material unwanted event, with inherent and residual risk on the risk matrix, its tier, its priority score and rank, its owner, bowtie status and review dates.
Control Owner Accountability StatementWord (.docx)What a control owner does, the critical controls they own, and the knowledge, authority, resources and training the role needs, accepted and signed.
Critical Control Performance Standard TemplateWord (.docx)The user manual for one critical control: purpose, scope, performance requirements, failure modes, the line between a Non-conformance and a Fail, accountabilities, competence, verification and corrective actions.
Critical Control Selection ChecklistWord (.docx)Takes every control on the bowtie through two questions in order, is it a control and is it critical, with the stress test and the criteria a critical control must meet.
Critical Controls RegisterExcel (.xlsx)An Excel register of every control tested for selection: the result, the owner, the performance standard, the verification frequency, the last result and whether it is overdue.
CCV Program and ScheduleExcel (.xlsx)An Excel schedule of every critical control at every location: the exposure, the suggested frequency, the verifiers, the last result, what is due or overdue, and monthly results.
Field Leadership and Critical Control Observation GuideWord (.docx)A guide for leaders going to see the critical controls working and talking to the crew: what to look at, what to ask, and what to do when a control is missing.
Generic CCV Form TemplateWord (.docx)A field form that proves one critical control is working, grouped by five checks and scored Pass, Fail or Non-conformance, with the overall result and the response to a Fail.
Control Failure Response and Investigation Trigger ProcedureWord (.docx)What happens every time a critical control is found missing or not working: the response to each rating, who is told and how fast, notifying the regulator, and when to investigate.
Critical Risk DashboardExcel (.xlsx)An Excel dashboard of lead and lag indicators for critical risks, with each critical risk listed by name, in rank order, with its status.
Lessons Learned RegisterExcel (.xlsx)An Excel register of lessons from control failures, incidents and reviews, each with the check that failed, an action, an owner and a re-verification before it is closed.
Officers' Critical Risk ReportWord (.docx)The quarterly report to officers: verifications done and missed, Pass, Non-conformance and Fail, what failed and what was done, each critical risk's status, and the due diligence questions.

How the plan works

The plan is the core; each folder is one part of the system: identify, controls, verify and report. Each critical risk goes through them in turn, one at a time in rank order, and what verification, failures and reviews find goes back to the bowtie.

FIRST

Start here

  • Setup guide: what to adapt, and every placeholder
  • 90-day implementation plan
  • Read Me First, Product Overview, Permitted Use Terms and Version Information
STEP 1

The plan

  • Critical risk management plan, with what Tier 1 and Tier 2 require
  • Critical risk policy to sign
  • Roles and accountabilities guide
  • Australian law cross-reference
  • Standards cross-reference
STEP 2

Identify

  • Broad-brush risk assessment workshop guide and record
  • Critical risk register: tier and rank (Excel)
  • Bowtie analysis template, with a worked example
  • Bowtie workshop guide
STEP 3

Controls

  • Critical control selection checklist
  • Critical control performance standard template
  • Control owner accountability statement
  • Critical controls register (Excel)
STEP 4

Verify

  • Verification program and schedule (Excel)
  • Generic verification form: Pass, Fail, Non-conformance
  • Field leadership and critical control observation guide
STEP 5

Report

  • Critical risk dashboard (Excel)
  • Officers' critical risk report
  • Control failure response and investigation trigger procedure
  • Lessons learned register (Excel)

Set it up for your organisation

Before you adopt it, adapt the plan to:

  • Your business: its name, sites, and the work the plan covers, including contractors' work
  • Your risk matrix and consequence scales, the same as your WHS risk register
  • What Tier 1 and Tier 2 require: owners, bowtie deadlines, verification frequencies, reporting and reviews
  • Who runs the system, who sponsors it, and who a failed critical control is escalated to
  • Your incident reporting, and any change and contractor procedures
  • Review the plan after a fatality, serious injury or high potential incident on a critical risk, a significant change to the business or a change in the law, and at least once a year

What you need

  • Someone to run the system and keep the registers, and an executive to sponsor it and receive every failed critical control
  • The people who do the work, supervisors and HSRs, for the broad-brush and bowtie workshops
  • A critical risk owner for each critical risk, and a control owner for each critical control
  • Trained verifiers, and the time to verify the critical controls in the field on schedule: that is where the plan works or fails
  • Your WHS risk register and incident reporting, and any change and contractor procedures, so the plan works inside them

Before you use it

  • The plan is licensed for internal use by the purchasing organisation. A WHS or HR adviser can set it up for a client that has bought it; using it with other clients needs our written permission.
  • The plan must be adapted to your organisation, your work and the hazards you find, in consultation with your workers, before it is adopted.
  • Using the plan does not by itself make a workplace compliant with WHS or OHS laws, it does not replace verifying the critical controls in the field, and it is not ISO certification or endorsed by ICMM. It supports the work of managing the risks that could kill or seriously injure; it is not legal advice.

Critical Risk Management Plan: questions

What is critical risk management?

A structured approach to identifying, assessing and controlling the highest-consequence risks in a workplace. General risk management looks at every hazard; critical risk management concentrates on the risks whose worst credible outcome is a fatality, serious injury or catastrophic event, finds the few controls that prevent them or limit the harm, and makes sure, by verifying them in the field, that those controls are in place and working.

What is a critical control?

A control that is crucial to preventing a critical risk event or limiting its consequences, so that its absence or failure would significantly increase the risk despite other controls being in place. The plan selects them in two steps: first, is it a control at all (an act, object or technical system, not a document, form or training record); then, is it critical. A critical control must be auditable, measurable and practical, and mitigating controls, such as the emergency response for a fast event, can be critical too.

What is critical control verification?

Proof, not assumption, that a critical control exists, is in place and in good condition, works as designed, is used properly and is not being bypassed or failing silently. In this plan each verification is done in the field against the control's performance standard and scored Pass, Fail or Non-conformance. Items that check the control itself are Pass or Fail only; Non-conformance is kept for administrative items such as an overdue record. Any Fail stops the work that relies on the control and is escalated as a high potential incident.

Do I need a critical risk management plan?

You need to manage the risks of your work, and the worse the possible harm, the more is reasonably practicable. Under the WHS laws, a business must eliminate risks so far as is reasonably practicable, or minimise them, keep its controls effective and review them when they do not control the risk, and officers must take reasonable steps to verify that the resources and processes for this are provided and used. A written plan is the clearest way to show how you do that for the risks that could kill, and gives you the records that show it.

How is it different from a WHS management plan?

A WHS management plan covers every hazard. This plan concentrates on the few that could kill or seriously injure, and goes much further for them: bowties, critical controls, performance standards, named owners and field verification. It uses the same risk matrix, so a critical risk is always rated High or Extreme, and it never lowers what the WHS management system requires.

Which state is it for?

All of Australia. It is written to the model WHS laws, which most jurisdictions have adopted, with notes on how Victoria (with its own OHS laws), Western Australia and the Commonwealth (Comcare) differ. Mining and some other industries have their own laws for principal hazards and critical controls: the plan can sit alongside them, but does not replace them.

Does this plan make us compliant?

No. No plan can do that on its own. Your duties are met by managing your critical risks in your actual workplaces, so far as is reasonably practicable, in consultation with your workers, and by checking that the critical controls really work. The plan gives you the structure and the tools to do that, and a record that you have. Using the plan does not by itself make a workplace compliant with WHS or OHS laws, it does not replace verifying the critical controls in the field, and it is not ISO certification or endorsed by ICMM. It supports the work of managing the risks that could kill or seriously injure; it is not legal advice.

Is it ISO certified, or endorsed by ICMM?

No. The plan is aligned to ISO 31000 for the risk method and AS/NZS ISO 45001 for hazard identification, operational control, monitoring and corrective action, and it follows the broad approach of ICMM's critical control management guidance, with a cross-reference to each. Certification is done by an independent certification body, against the standard itself, and the plan is not produced, endorsed or reviewed by ICMM.

How does it fit with the other plans?

It sits under your WHS management system and uses the same risk matrix as our WHS Management Plans, which treat the controls for Extreme and High risks as critical; this plan is how a business does that, in full, for its critical risks. Our Contractor, Change and Project Management Plans go with it, for the contractors, changes and projects where critical controls most often fail. The documents you adopt name no other product: where you have contractor, change or incident procedures, the plan works with them, and where you do not, its own steps apply. See the WHS Management Plan.

Do we still need training?

Usually, yes. The plan only works when the people who run it know how. The Critical Control Management packages teach the same method in the same words at every level: workers, supervisors and verifiers, practitioners, and officers. The Risk Management packages cover the broad-brush risk assessment and risk governance, and the toolbox talks brief the crew on a critical risk. See the Critical Control Management training packages.

Can a WHS adviser use it with clients?

The plan is licensed for internal use by the purchasing organisation. A WHS or HR adviser can set it up for a client that has bought it; using it with other clients needs our written permission. The simplest way is for each client to buy its own copy, which you then adapt with them.

Can we edit the documents?

Yes. Every document is supplied in Word (.docx) or Excel (.xlsx), so you can add your logo, change the wording and adapt it to your workplace. The copyright notice must stay.

Do we need to adapt it before use?

Yes. The plan must be adapted to your organisation, your work and the hazards you find, in consultation with your workers, before it is adopted. The setup guide lists what to change, and the 90-day implementation plan the order to do it in.

Is GST included in the price?

Yes. Every price in the store includes GST, so $349.00 is the total, including $31.73 GST. Your receipt is a tax invoice showing the GST.

How are the files delivered?

As a ZIP download. Card purchases can be downloaded straight away from the confirmation page and by a link we email you. Download links expire after 14 days for security; you can request a new one at any time.

Can we order by invoice, or for several sites?

Yes. Use Request an Invoice to order through your normal procurement process, with a purchase order number and quantities if you need them. The files are released once payment is confirmed.

Can we use them at more than one site?

Yes, across your own organisation. The documents are licensed for internal use by the purchasing organisation. A consultant, labour hire business or training provider supplying them to clients needs separate written permission.

What is your refund policy?

Your rights under the Australian Consumer Law are not affected. See the Refund Policy for how we handle a document that is faulty, not as described, or not what you ordered.

Licence and legal information here is general. It may not be correct in your jurisdiction: please check with your local WHS or OHS regulator.

Ordering for a business or several sites? Request an invoice. Other questions: contact us.

Training that goes with it

The plan sets up the system; training gives the people who run it what they need. The Critical Control Management packages teach the same method in the same words at every level, from workers who check a critical control before the job to supervisors and verifiers, practitioners and officers; the Risk Management packages cover the broad-brush risk assessment and risk governance; and the toolbox talks brief the crew on a critical risk.

Critical Control Management Awareness

For: All employeesDuration: 45–60 minutes

For every worker on a site with fatal risks: what a critical control is, how to check it, and when to stop the job.

What's included
  • Editable PowerPoint presentation
  • Facilitator guide and participant workbook
  • Critical control check activity
  • Knowledge assessment and completion certificate

Critical Control Management Leadership

For: Supervisors, team leaders and managersDuration: 3–4 hours

For supervisors and managers who verify critical controls in the field and act when one fails.

What's included
  • Editable 44-slide presentation and detailed facilitator guide
  • Four field verification scenarios from high-risk work
  • Field verification and control failure response tools
  • Completion certificate and training records

Critical Control Management Practitioner

For: Whoever is responsible for WHS or risk in your businessDuration: One day

A full day on bowtie analysis, selecting critical controls, performance standards and verification programs.

What's included
  • Editable 50-slide presentation and detailed facilitator manual
  • Full case pack and three worked critical control examples
  • Bowtie, critical control register (Excel) and performance standard templates
  • Assessments, completion certificate and training records

Executive Critical Control Governance

For: Business owners, directors and senior managersDuration: 90–120 minutes

For executives and directors: oversight of fatal risks, critical control reporting and real assurance.

What's included
  • Editable 28-slide executive presentation and facilitator guide
  • Briefing workbook and completion certificate
  • Critical control reporting example: the same report done two ways
  • Governance scenario and assurance checklist

Critical Control Management Implementation Toolkit

For: Businesses with fatal or catastrophic risks, and whoever runs WHS or risk in them

Editable bowtie, critical control register, performance standard, verification and failure response tools.

What's included
  • Bowtie template and critical control register
  • Critical control performance standard template
  • Field verification and control failure response tools
  • Implementation guide

Risk Management Practitioner

For: Whoever is responsible for WHS in your businessDuration: One day

A full day on broad-brush and task risk assessment, the hierarchy of control, risk registers and management of change.

What's included
  • Editable 50-slide presentation and detailed facilitator manual
  • Full case pack and three worked risk assessment examples
  • Risk register workbook (Excel) and assessment worksheets
  • Assessments, completion certificate and training records

Executive Risk Governance

For: Business owners, directors and senior managersDuration: 90–120 minutes

For executives and directors: risk appetite, risk reporting, assurance and the questions that test whether controls are working.

What's included
  • Editable 28-slide executive presentation and facilitator guide
  • Briefing workbook and completion certificate
  • Risk reporting example: the same report done two ways
  • Governance scenario and assurance checklist

Mobile Equipment and Vehicle Interaction Awareness

For: Workers on sites with forklifts, trucks, loaders or light vehiclesDuration: 20–30 minutes

For anyone who works around forklifts, trucks, loaders or utes: how people are hit by mobile equipment, and the habits that keep pedestrians and machines apart.

What's included
  • Editable slides with speaker notes, plus PDF
  • Facilitator guide and participant handout
  • Multiple-choice assessment with answer key
  • Attendance record form and certificate template

Working at Heights Awareness

For: All workersDuration: 20–30 minutes

For workers who use ladders, platforms, roofs or anything off the ground: why falls kill, and the order of controls that prevents them.

What's included
  • Editable slides with speaker notes, plus PDF
  • Facilitator guide and participant handout
  • Multiple-choice assessment with answer key
  • Attendance record form and certificate template

Isolation and Lockout Awareness

For: Workers who maintain, clean, clear or adjust plant and equipmentDuration: 20–30 minutes

For workers who clean, clear, maintain or adjust plant: why every energy source must be isolated, locked and proved dead before hands go in.

What's included
  • Editable slides with speaker notes, plus PDF
  • Facilitator guide and participant handout
  • Multiple-choice assessment with answer key
  • Attendance record form and certificate template

Electrical Safety Awareness

For: All workersDuration: 20–30 minutes

For workers who use electrical equipment or work near powerlines: how electricity injures, the checks before use, and what to do if someone is shocked.

What's included
  • Editable slides with speaker notes, plus PDF
  • Facilitator guide and participant handout
  • Multiple-choice assessment with answer key
  • Attendance record form and certificate template

Cranes and Lifting Awareness

For: Workers on sites where cranes, hoists or lifting gear are usedDuration: 20–30 minutes

For workers on sites where loads are lifted: the lift plan, exclusion zones, checking lifting gear, and the rule that nobody goes under a suspended load.

What's included
  • Editable slides with speaker notes, plus PDF
  • Facilitator guide and participant handout
  • Multiple-choice assessment with answer key
  • Attendance record form and certificate template

Confined Spaces Awareness

For: All workersDuration: 20–30 minutes

For workers who could come across a tank, pit, silo or vessel: how to recognise a confined space, and why you never enter one without a permit.

What's included
  • Editable slides with speaker notes, plus PDF
  • Facilitator guide and participant handout
  • Multiple-choice assessment with answer key
  • Attendance record form and certificate template